Tap lever

The only control the user ever touches. Push the lever, water flows. Release, water stops. Mechanical — no solenoid, no electronics, no software update. Lasts the life of the kitchen.

Mains inlet isolator

Quarter-turn ball valve upstream of the system. Turn off when going away for more than two weeks. Engineer’s on/off for service work.

Storage tank ball valve

Between the tank and the system. Lets the engineer service the filters without dropping or draining the tank. Lockable for letting properties on changeover days.

Drain saddle valve

Isolates the drain line. Used by the engineer during cartridge change to avoid spillage — bypasses the small amount of reject water that would otherwise run during the swap.

TDS sample port

Small push-fit port on the product line. Engineer takes a TDS reading at each annual service to verify the membrane is still rejecting at 95%+. Below 95% triggers a membrane swap.

Pressure gauge · optional

Clip-on gauge shows mains and post-membrane pressure. Useful for diagnosing slow-flow complaints — tells you straight away whether the issue is mains or filter clogging. £35 add-on.

Inline digital TDS · optional

Battery-powered TDS display fitted on the tap line. Two buttons: mode (inlet vs outlet TDS) and calibrate. Shows real-time purity on the worktop. £65 add-on for the data-curious owner.

No power switch

Deliberate. No plug, no power switch, no firmware. A power cut has zero effect on Standard PRO — you can still pour a glass of water. Pumped versions (P’ure Balance Pumped) do need a 230 V supply.

Wall-mount filter block

Slim integrated chassis holding stages 1, 2, 3, 5 and 6 in a single moulded body. Designed to fix to the cupboard side wall or rear panel — cabinet floor stays clear for the tank. Quarter-turn cartridges, food-grade polypropylene, 8 bar rated.

High-throughput membrane

Thin-film composite membrane in the same class as our commercial RO range, rated at 290 L/day. Same 99.8% rejection as the Standard PRO membrane — just sized larger for the higher flow.

Aquaspring re-mineralisation

The stage 6 cartridge. Food-grade media that adds calcium and magnesium back into the pure RO water in measured doses. Same part as the Standard PRO 6-Stage — spares stock shared across the range.

12 L pressurised tank

Pre-charged steel tank with food-grade EPDM bladder. 0.5 bar factory pre-charge. Sits in the cupboard below the wall-mount chassis. Ten-year design life.

Dedicated chrome faucet

Slim lever-style drinking-water tap. Drilled into the worktop next to your main kitchen tap. Chrome standard, brushed nickel on request, no extra cost.

Drain saddle clamp

Clamps onto the existing waste pipe under the sink. Self-piercing. The drain output is the reject water from the membrane — lower volume than Standard PRO due to the more efficient membrane.

JG tubing & fittings

1/4" food-grade LDPE tubing in colour codes: blue inlet, red drain, white product. Push-fit fittings throughout. Tool-free service.

Wall-mount bracket

Steel bracket with pre-drilled fixings. Fits to the cupboard side wall or rear panel. The whole filter block hangs off it. Keeps the unit off the cupboard floor, leaving room for the tank or for storage.

Dedicated kitchen tap

Slim chrome spout installed next to your main kitchen tap. Press the lever, RO water comes out. Your regular tap still works normally for washing-up — you don’t waste filtered water on dishes.

12 L storage tank

Pressurised tank under the sink holds ready-filtered water. Pour a full kettle in seconds. Refills automatically as you use it — back to full in about 1.5 hours thanks to the higher-throughput membrane.

Coffee, formula, ice

Bigger taste change shows up in coffee, tea and stock than in cold drinking water. Re-mineralised RO is suitable for baby formula too — balanced minerals, no chlorine, no lead.

Pause for holiday

Going away for more than a fortnight? Turn the inlet isolator off and flush the tank when you’re back. We’ll show you the sequence on handover.

Annual filter kit

From £45. Replaces stages 1, 2, 3, 5, 6 in one tool-free swap. CleverBloom service plan includes the kit, the visit, the TDS test and the tank sanitisation — or DIY in 15 minutes and we post the kit.

Membrane every 2–3 yr

Stage 4 (the RO membrane) lasts longer than the other stages. We test it on each annual visit with a TDS meter and replace only when rejection drops below 95%.

Tank sanitisation

Every three years we sanitise the storage tank with food-grade peracetic acid. Done as part of the annual visit at no extra charge. Keeps bacterial load undetectable.

2-yr warranty · 5-yr housings

Full 2-year manufacturer warranty on the system. Housings warranted 5 years against leaks. CleverBloom handles any warranty claim direct with Ecosoft — you don’t ship cartridges across Europe.